Ultra HD 16 Ch. 4TB NVR Best Security System with 16 4MP Security Cameras

The remote monitoring feature really comes in handy as I have to travel a lot because of work. I have installed it in my home and thinking of using Revo systems for my office as well.

We bought this unit because we had some stuff stolen off of our business property. After some procrastinating I finally installed the system. I already have knowledge running cables and making up Cat5 wires so the install was not too difficult. It will depend on your property and your level of expertise.
We opted for a 16 port NVR so we can add to it later if we want. The 8, 4 MP cameras provide enough detail to capture license plates and good quality video. We actually got video of some guys stealing a few weeks ago. The police were impressed with the video. When we showed the police the video they were able to recognize the guy right away. Being able to show them the cars license plate was a bonus.
These cameras are good. I kind of wished I would have opted for the varifocus model. The video does get pixilated as you use the zoom feature on the NVR software.
Set up was fairly easy, I was able to figure out most of the software and settings with out help. The few things I needed assistance with I googled and found answers. I think playback of material is pretty easy to run through. The motion detection is pretty sensitive. I have tried turning down but still goes off due to leaves or bugs. But thats ok the DVR holds about 2 to 3 months of footage so its good. About the only thing I would complain about is that I have 1 camera that the video flutters sometimes. It could be that I ran the Cat5 wire too close to a power source or have a bad connector on it. I have not tried switching it with another camera yet. Im going to assume this is something that I did wrong until I find out different.
So in short great price on a great system. I am pleased.

I purchased this system a few weeks ago. Wasn't sure how easy it would be to set up with my existing POE switch. Mounted the cameras and plugged them in. Came in to get everything set up. Turned the system on and once it booted. All the cameras came up on the screen. There was no setup really. Just rearranged them in the order I wanted them on the screen. Set the motion detection and a few other personal preferences and I was up and running in a matter of minutes. Very user friendly interface and much better resolution than my old system. Remote viewing is also excellent.

Very good system. Kudo's to the designers. Software instructions are a bit lacking, but patience prevails. Hope it lasts!